Double twist bunching
Description
- Double twist bunching machine with capstans 400-800 mm
- Machine for reels diam. 400-560-630-760-800 mm
- Version with capstans and pulling unit
- Bedplate equipped with two cradle-holding rotors
- Cradle with reel-holding pintles and pneumatic / manual closing
- Bearing lubrication with grease
- Carbon-fibre bows (2) with pulleys, widia, ceramic passes
- Reel driven by an independent motor
- Internal layer spreader by means of Uhing
- Reel loading and unloading by means of an internal electrical platform
- Total sound-absorbent covering of the machine
Rigid cage stranding machines
Description
- Rigid cage stranding machines for reel range dia. 400 mm to 800 mm
- Stranding machines designed for the manufacturing of aluminium and copper plaits
- Reel-holding rotor manufactured in multiples of 6 reels
- Rotor manufacturing: 6/12/18/24/30/36 reels
- Locked reels in the rotor by means of motor-driven mechanical pintles
- Constant pay-off pull during the production
- Possibility to have the stranding machine with mechanical or electrical axis
- Wire end/breaking system to be found in each reel
- Stranding machines with the possibility to introduce prespiralling, sectorial, fixed, etc. stranding heads
- Possibility to have automatic and semiautomatic loading systems
- Loading in two versions, from above with motor-driven bridge cranes and from the bottom by means of platforms controlled by gearmotors
- Stranding machines equipped with pay-offs, gearbox, pulling unit and take-up
- Possibility to have a secondary deviation unit for line splitting
Tubular stranding machines
Description
- Tubular stranding machines for the pay-off of reels dia. 250 – 800 mm
- Rotor / Cradle-holding central pipe installed on supporting shoulders
- Thread guide passes along the entire rotor made with hard metal
- Oil-lubricated main bearings
- Wire end/breaking system to be found in each reel
- Disc-type rotor brake
- Reel-holding cradles installed on grease-lubricated bearings
- Reels locked with mechanical pintles: one is movable and one is fixed
- Possibility to have different reel loading solutions
- Total sound-absorbent covering of the machine
Tubular stranding machines
Description
- Tubular stranding machines for the pay-off of reels dia. 250 – 800 mm
- Rotor / Cradle-holding central pipe installed on supporting shoulders
- Thread guide passes along the entire rotor made with hard metal
- Oil-lubricated main bearings
- Wire end/breaking system to be found in each reel
- Disc-type rotor brake
- Reel-holding cradles installed on grease-lubricated bearings
- Reels locked with mechanical pintles: one is movable and one is fixed
- Possibility to have different reel loading solutions
- Total sound-absorbent covering of the machine
Take-up
Description
- Take-up
- Gantry type
- Portal take-ups
- Column take-ups with movable shoulders
- Cantilever
- Double take-ups
- Rotating take-up
- Rotating take-ups with rollers
Pay-off
Description
- Pay-off
- Gantry type
- Portal pay-off / big
- Portal pay-off
- Column pay-off with movable shoulders
- Cantilever Pay-off
- Backtwist – Rotating pay-offs – vertical type
- Backtwist – Rotating pay-offs – horizontal type
- Rotating pay-offs – fork type
- Rotating pay-offs with rollers
- For braiding line
- Creel pay-offs
- Flyer
Taping lines
Description
- Concentric taping lines
- Longitudinal taping lines
- Tangential taping lines
Rewinding lines
Description
- Rewinding lines for reels dia. 630 – 3500 mm.
- Rewinding lines characterised by any type of pay-off and take-up (cantilever, portal, movable shoulders, gantry, etc.).
- Possibility to have double pay-offs and take-ups.
- Possibility to introduce pulling units and caterpillar.
- Upon demand of the customer, any control instrument can be supplied (dancer, cutting device, spark tester, lump detection, cable marking device, etc.).