Railway > Wire & Cable > Rotating machines

Double twist bunching


Description


  • Double twist bunching machine with capstans 400-800 mm
  • Machine for reels diam. 400-560-630-760-800 mm
  • Version with capstans and pulling unit
  • Bedplate equipped with two cradle-holding rotors
  • Cradle with reel-holding pintles and pneumatic / manual closing
  • Bearing lubrication with grease
  • Carbon-fibre bows (2) with pulleys, widia, ceramic passes
  • Reel driven by an independent motor
  • Internal layer spreader by means of Uhing
  • Reel loading and unloading by means of an internal electrical platform
  • Total sound-absorbent covering of the machine

Rigid cage stranding machines


Description


  • Rigid cage stranding machines for reel range dia. 400 mm to 800 mm
  • Stranding machines designed for the manufacturing of aluminium and copper plaits
  • Reel-holding rotor manufactured in multiples of 6 reels
  • Rotor manufacturing: 6/12/18/24/30/36 reels
  • Locked reels in the rotor by means of motor-driven mechanical pintles
  • Constant pay-off pull during the production
  • Possibility to have the stranding machine with mechanical or electrical axis
  • Wire end/breaking system to be found in each reel
  • Stranding machines with the possibility to introduce prespiralling, sectorial, fixed, etc. stranding heads
  • Possibility to have automatic and semiautomatic loading systems
  • Loading in two versions, from above with motor-driven bridge cranes and from the bottom by means of platforms controlled by gearmotors
  • Stranding machines equipped with pay-offs, gearbox, pulling unit and take-up
  • Possibility to have a secondary deviation unit for line splitting

Tubular stranding machines


Description


  • Tubular stranding machines for the pay-off of reels dia. 250 – 800 mm
  • Rotor / Cradle-holding central pipe installed on supporting shoulders
  • Thread guide passes along the entire rotor made with hard metal
  • Oil-lubricated main bearings
  • Wire end/breaking system to be found in each reel
  • Disc-type rotor brake
  • Reel-holding cradles installed on grease-lubricated bearings
  • Reels locked with mechanical pintles: one is movable and one is fixed
  • Possibility to have different reel loading solutions
  • Total sound-absorbent covering of the machine

Take-up


Description


  • Take-up
  • Gantry type
  • Portal take-ups
  • Column take-ups with movable shoulders
  • Cantilever
  • Double take-ups
  • Rotating take-up
  • Rotating take-ups with rollers

Pay-off


Description


  • Pay-off
  • Gantry type
  • Portal pay-off / big
  • Portal pay-off
  • Column pay-off with movable shoulders
  • Cantilever Pay-off
  • Backtwist – Rotating pay-offs – vertical type
  • Backtwist – Rotating pay-offs – horizontal type
  • Rotating pay-offs – fork type
  • Rotating pay-offs with rollers
  • For braiding line
  • Creel pay-offs
  • Flyer

Taping lines


Description


  • Concentric taping lines
  • Longitudinal taping lines
  • Tangential taping lines

Rewinding lines


Description


  • Rewinding lines for reels dia. 630 – 3500 mm.
  • Rewinding lines characterised by any type of pay-off and take-up (cantilever, portal, movable shoulders, gantry, etc.).
  • Possibility to have double pay-offs and take-ups.
  • Possibility to introduce pulling units and caterpillar.
  • Upon demand of the customer, any control instrument can be supplied (dancer, cutting device, spark tester, lump detection, cable marking device, etc.).